鏈條潤滑油

鏈條潤滑油

Regular maintenance and lubrication are essential to ensure low
wear and a long service life for a chain drive. Sufficient and effective
lubrication can dramatically improve the lifespan of a chain.
The maintenance and lubrication frequency of the chain drive
are determined by the operating conditions of the system. The
selection of the correct lubricant and the appropriate method of
lubrication guarantee good reduction of wear, sufficient protection
from corrosion and optional damping characteristics.

Lubrication methods

Premium high-technological initital lubricant

Additional high-performance initial lubricants for every application

EL-1 High-performance lubricant for operating
temperatures up to 250°C
The EL-1 chain lubricant is a synthetic chain oil that provides reliable
lubrication even at high operating temperatures. This lubricant
is characterized by excellent pressure resistance and anti-wear
properties, as well as by a low evaporation rate at high temperatures.
Technical data:
Base oil Synthetic
Colour Yellow
Viscosity Approx. 100 mm2/s at 40 °C
Density Approx. 0.91
Operating temperature 0 °C to 250 °C
EL-2 FDA H1-rated food-grade lubricant
The EL-2 lubricant has been developed specially to meet the particular
needs of the food industry. As well as having a high pressure
absorption capacity, it is water-resistant, odourless, tasteless
and provides targeted protection against corrosion.
Technical data:
Base oil Synthetic
Colour Colourless
Viscosity Approx. 36 mm2/s at 40 °C
Density Approx. 0.83
Operating temperature -60 °C to 150 °C
EL-4 Synthetic long-life lubricant
El-4 is a synthetic high-performance lubricant. Especially in critical
mixed friction scenarios, EL-4 effectively reduces the energy
required and consequently extends the life of the chain. The advantage
of EL-4 compared with is its greater operating temperature
range.
Technical data:
Base oil Synthetic
Colour Reddish-brown
Viscosity Approx. 225 mm2/s at 100 °C
Density Approx. 0.94
Operating temperature -25 °C to 250 °C

EL-6 New generation of food-grade wax lubrication with
FDA-H1 classification (previously EL-5)
EL-6 is a chain lubricating wax applied to the chain link in special
hot immersion baths at iwis. This product was developed specifically
for the initial lubrication of chains and consequently offers
excellent wear resistance and good corrosion protection. Besides
the food industry, EL-6 is also used in many other applications
such as the woodworking industry for example.
Technical data:
Structure Paste
Colour Beige
Viscosity Approx. 125 mm2/s at 100 °C
Density Approx. 0.89
Operating temperature -40 °C to ~70 °C
(changes state)
EL-8 Rapidly biodegradable lubricant
in water hazard class 1
Some applications require the use of rapidly biodegradable lubricants.
EL-8 is a multi-purpose oil that biodegrades quickly and is
classified as water hazard class 1 (not hazardous to water). It features
very good viscosity temperature behaviour as well as a wide
operating temperature range.
Technical data:
Base oil Synthetic
Water hazard class WGK 1
Viscosity Approx. 100 mm2/s at 40 °C
Density Approx. 0.94
Operating temperature -30 °C to 110 °C

EL-9 Thixotropic anti-corrosion oil
EL-9 is an oil that provides especially good corrosion protection
for chains. The added solvents allow the lubricant to be applied so
thinly that only a very light film of lubricant remains on the surface
of the chain. This lubricant is therefore ideally suited to applications
where only very small amounts of oil residue are permitted
to come into contact with the goods being conveyed. As it is highly
compatible with other lubricants, it is usually unnecessary to
clean the chain prior to relubrication.
Technical data:
Salt spray test > 600 h
Viscosity Approx. 15.5 mm2/s at 100 °C
Density Approx. 0.85
Operating temperature -20 °C to 200 °C

VP6 iwis VP6 Kombi Superplus Spray
The iwis VP6 Kombi Superplus Spray is a high-adhesion, high temperature
chain oil for diverse industrial chain applications.
Advantages:
? Very high temperature stability
? Low evaporation
? Very good adhesion properties
? Good penetration despite high viscosity
? Extremely high wear protection
Technical data:
Base oil synthetic hydrocarbon oil
Colour green, transparent
Viscosity approx. 1800-2200 mm/s at 40 °C
Operating temperature 0 °C to 250 °C

Re-lubrication

鏈條潤滑油

鏈條潤滑油

鏈條潤滑油

鏈條潤滑油

鏈條潤滑油

鏈條潤滑油

鏈條潤滑油

鏈條潤滑油

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!